 |
 |
 |
(805) 481-9599 |
||
     |
||
ISOLATORS
DMXOPTO: Inline isolator
121: Isolation amplifiers
DINTAP / DININTR: DIN-rail isolator
ETHERNET PRODUCTS
E2E: Ethernet to Ethernet
E1REL20A: 1 Ch. Ethernet Relay
E8ANL-DIN: 8 Ch. Ethernet to Analog
NODE: Ethernet/DMX Interfaces
NODE DISCOVERY
PRE10ETHER-A: Ethernet Preset 10
ES2ETHER: Ethernet Entry Station Two
SPLITTERS
Splitter Selection Matrix
123/125/1211: 3, 5 or 11 output
124: 4 output DMX / RDM splitter
125EE: Enhanced five output
125EE-WALL: Enhanced wall mount
127: 7 output DMX / RDM splitter
1212: 12 output DMX / RDM splitter on DIN rail
SIGNAL ROUTERS
RR: Electronic patch bay
SW: Passive A/B switches
WIRELESS DMX512
Marconi TX: Transmitter
Marconi SP: 3 way splitter
Marconi LV: Low voltage receiver
MERGERS
221E: Enhanced 2,3,4,5 or 6 input
221E-WALL: Enhanced wall mount
POWER SUPPLIES
LED600: 24V 600W
LED400: 24V 400W
LED300: 24V 300W
LED100: Battery & Wireless
XFMR: Class 2 Transformer
WALL PLATES
WP-O/WP-I: Passive XLR plates
DFDNET: Buffered DMX512 plates
FIXTURES
EDISON: 25 lamp arrayable
DIMMERS
DMX8DIM: 8 Channel NEMA1
DMX12DIM-ELV: 12 Channel
DMX24DIM: 24 Channel
RELAYS
DMX1REL20A: 1 Ch. line voltage
DMX6REL15A/-30A: 6 Ch. line voltage
DMX2REL5A: 2 Ch. low voltage
DMX6REL1A: 6 Ch. low voltage
E1REL20A: Ethernet Relay
INTERFACES
Analog to DMX 48 channel
RS-232 to DMX
DMXDECELERATORII
DMX to DMX
DMX to AMX192 192 Ch.
DMX to Analog 12 channel
DMX to Analog 96 channel
DMX to CMX / CMX to DMX
DMX to Strand D54
DMX to DALI
DMX to Microplex/LMX/Ultraplex
DMX to Solid State Relay 96 Ch.
DMX iPlayer interface
E8ANL-DIN: 8 Ch. Ethernet to Analog
Fire Alarm Interface
CONSOLES
APATHY: Single channel console
COLORWHEEL
PRESET 8 - DMX Snapshot Console
PRESET 10 - DMX Snapshot Console
PRESET 10 QUATTRO - 4 Universe
PRE10-A2: Preset 10 Architectural 2
PRESET 12 - DMX Snapshot Console
PRESET 18 - DMX Snapshot Console
PRE10ETHER-A: Ethernet Preset 10
RAD: RDM Address Device
RERUN - DMX Recorder
ES2: Entry Station Two
ES2ETHER: Ethernet Entry Station Two
DMX TESTERS
DMXdoohickey
DMXTSTR: DMX512 line tester
GIZMO: DMX512 test box
OTHER DMX STUFF
TERM: XLR Terminator w/ LED
T2: XLR Economy terminator
T-45: RJ45 Terminator
MOUNTING OPTIONS
RK: Rack Kits
JBOX: Product mounted in J-Box
CUSTOM & OEM
Click Here
  (Images not to scale) |
Links NODE1 - One Port NODE2 - Two Port NODE4 - Four Port
NODE16 - Sixteen Port Related Products |
model: |
The NODE1 has a single port and is available in both Architectural and Portable versions. The Architectural version, NODE1-A, requires only a single Ethernet cable for power (via PoE) and signal, and fits in a single gang wall mount box. The NODE1 is supplied with either a female (output) or a male (input) DMX connector.
The NODE2 has two front mounted DMX512 ports which can be configured as either input or outputs. The standard unit is provided with two female DMX output connectors. Each port has an associated two-digit display with up/down push buttons which are used to select the DMX universe number for that port. This allows easy system configuration in the field without the need to connect a computer. DMX universes 1 – 99 are accessible using the buttons and displays. For security, the DMX universe selection cannot be changed while a cable connector is inserted. When ports are configured for universe numbers above 99, the local buttons are locked out from modifying the configuration.
The NODE4 has four fully isolated DMX ports in a rack mountable enclosure. Each port can be configured as either an input or as an output. All of the data connectors can be mounted on either the front or rear panel. Their location can be changed in the field to accommodate fixed or touring installations. Network and DMX port settings may be accessed using a front panel interface in addition to the internal web server.
The NEW NODE16 is a portable or rack mounted Ethernet to DMX bridging device. It accepts Artistic License's Art-Net or Streaming ACN (ANSI E1.31) protocols. There are sixteen DMX512 outputs, and each of the outputs are isolated from the Ethernet input and all other outputs. The Ethernet input connection is made via an Ethercon RJ45 connector, and the DMX512 output connections are made via 5-pin female XLRs. The NODE16 is powered by 100-240 VAC. NODE configuration takes place with a backlit graphical LCD and an encoder wheel.
The NODE16-DIN is a DIN-rail mounted Ethernet to DMX bridging device. It accepts Artistic License's Art-Net or Streaming ACN (ANSI E1.31) protocols. There are sixteen DMX512 outputs, and each of the outputs are isolated from the Ethernet input. The Ethernet input connection is made via an RJ45 connector, and the DMX512 output connections are made via pluggable Phoenix terminal blocks. The NODE16-DIN supports Power over Ethernet (PoE – 802.3af) or a 24-48VDC power input. NODE configuration takes place with a backlit graphical LCD and an encoder wheel.
Doug Fleenor Design is a proud member of:
